CTEK 0.8 Battery Conditioner (Jag Enth)

• Free connector kit included for difficult to reach batteries. 
• Monitors voltage and turns on & off automatically. 
• Can be used without disconnecting the car electrics. 
• Suitable for use on batteries from 1.2Ah to 70Ah. 
• Can charge negative & positive earth vehicles. 

The CTEK0.8 battery conditioner uses the same PRIMARY SWITCHED electronics to make it the most advanced conditioner available today. Perfectly suited for classic cars with minimal electronics or motorbikes. 

The CTEK0.8 is designed for keeping good batteries in good condition. The conditioner constantly monitors the voltage after it has charged the battery to 14.4v and then only pulse’s the battery when the voltage drops due to alarms or natural drainage. This eliminates the danger of over charging the battery allowing it to be left connected for many months at a time.

The XS0.8 will charge the battery to 95% at 0.8amps, it will then reduce its input current to 0.4 amps to slowly bring the battery to its maximum voltage before turning off and waiting for the battery to fall to 95% efficiency (approx 12.9v) when it will turn on again and condition the battery back to 100%

The CTEK0.8 will not charge a flat battery, it is designed to keep a good battery in good condition, the battery will need a minimum of 10 volts for the ctek to detect what charge is required.